Contact Us

   We have a full service machine shop to help you with your needs big or small. We look forward to helping make that much needed progress on you project or that repair to get you back on the road. 

 

 

 

 

98 Woodman Hill Road
Minot, ME, 04258
United States

828-552-4707

North Run 2023-.jpg

Blog

Check in here to get news about our custom Harley Parts and see what we’ve been up too! All the word about new our Harley Davidson Parts Development, chopper news and trips! We have been making parts and providing fabrication services since 2007! Learn more about our USA Made Harley Parts here!

New Deep Six Cycles Stainless Peg Adapters!

Deep Six Cycles




So heres deal is with these pegs! The stainless adapter is 1 1/2" long 1/2" Thick. It is turned to with in +/- 3 tenths of of the i.d. of the peg. The adapter is cooled and the peg is heated for a shrink fit similar to installing neck cups. I feel this should make for the sturdiest/ safest brass peg on the market. And yeah it very well may be over kill... I will be doing r&d on adapters for female Harley mounts next and have it in mind to also offer some the Brit, Yamaha XS, And maybe Honda Cb. But the Female Harley ones are next.



Quanity And Finish
Style



Comment

The meaning of Hand Built! ("Aka Built to order")

Deep Six Cycles

Ok kiddies, I updated some of the options with the bars mostly pull down/ roll back of the top bar & top bar length. Keep in mind one of the reasons to wait for my "built to order" bars is the fact that they are not just some off the shelf one size fits all made in China B.S... If you are diggin my bars but want them just slightly different to suit your build as in dimensions, pull back/ pull down, knurling distance, or what ever. Give me a call or shoot me an email and I will try to work some thing out that will work for you. That is the benefit of not being part of a mass produced big box chain! Check out our some of our products & services on the right column of the blogs under product!

Photobucket
2 Comments

Hot, hot, hot off the presses!

Deep Six Cycles

 Ladys and Gentle Worms I present for your viewing displeasure (I hope) a short tale about a flaming shitter! Its been a crazy week. But then again coming in to work on Tuesday morning only to find your bathroom engulfed in flames will do that! There were 9 fire extinguishers emptied and some hose water to boot by the time the Fire Department showed up! But we are very lucky no one got hurt, no tool or product damage, and no vehicle loss. Just a few magazines, some tp, and hand soap. Oh yeah and the entire bathroom!!! 

http://m.citizentimes.com/apps/pbcs.dll/article?AID=2010101116020

Comment

Fork Shavin!

Deep Six Cycles


Ok here's the the deal for $200 Plus Shipping . I will take your dirty scared up legs. And shave the fender tabs (and brake tabs if desired) off and polish them to the hilt. Send em or random hate mail to Deep Six Cycles, 12 London Rd, Asheville Nc, 28803




Leave Or Shave Brake Tabs


Comment

Support Kennedy Chopper Class (AKA Mr. "Teach" does it again!)

Deep Six Cycles

  Knuckle Shuffle run for The Kennedy Chopper Class!!! Any cats that can make this should attend. For one it is going to own. For two it goes to some thing most of us wish we had access to in high school! Show your support if you can! I stole this off the Knuckle Shuffle run link.Check out the link below.

About the Ride

The purpose of this ride is to raise money for the Kennedy High School Chopper Class.  Every year Kevin “Teach” Baas reaches out to the motorcycle industry to help support his class.  This ride is dedicated to him and his class to ease the burden and keep the chopper class alive!  Please Join us for this ride and enjoy some of the coolest scooters around.  All bikes are welcome, of course we are dedicating this ride to the vintage iron and keeping history alive!  Just remember this is a old school ride, pack your sleeping bag, pack your tent and prepare for a fun. So come join us!
There will be two routes one leaving from The Ole Piper Inn, Lakeville, MN and the other from Milwaukee, Wisconsin. Both rides will converge on Yuba, Wisconsin, where we will meet at the Full Throttle Bar.  We will have a street party, bands, burnouts and fun. Sunday a Plant tour of S&S Cycle. in Viola, WI will be available for those who registered.
Price will be $25 per person all proceeds will go to Kennedy High School chopper class to help the kids build the choppers!
Remember “Its for the Kids”
Follow on facebook at http://www.facebook.com/event.php?eid=157137007658306&ref=ts

http://theknuckleshuffle.com/

http://www.kennedychopperclass.com/





Comment

The End of an Era...

Deep Six Cycles

 We had a great Halloween show! I really want to thank every one who helped to make it happen. As some of you may know this was a benefit for the Prison Books program. Being a volunteer run program they depend heavily on  benefits such as this one.
  Unfortunately, all good things must come to an end. We had a lot of wonderful people and I had a hell of a time myself. But the actions of a few have ruined it for every one. Mostly the graffiti on my landlords building across the street and a few other things... 

 It was fun while it lasted! And thank you to all the bands that have played here, and the folks that have organized shows in the past. It was nice to have a chance to give something back.

 On a side note if you know any thing about the graffiti it almost cost me my space. And we are on thin ice with our land lord now. I have faith that all will smooth over in time. But any info would be appreciated. We will also be reviewing the video from their security camera for clues as to who may have been involved. 

 Also who ever stole my girlfriends pick up from The Get Down this week end we are looking for you as well!!! And you punks can't drive worth a damn. With in about 20 seconds I had the truck unstuck with no pushing, digging or pulling. I hope you enjoyed our Stun Guns tape you decided to listen to during your adventure. Just one more security tape to review... I hope I can see your face you dumb shit!

Comment

Deep Six Cycles Hourglass Bars!

Deep Six Cycles

Our signature series Hourglass bars. Only at Deep Six Cycles!

  Available in 1" or 7/8". With pull down, Pull back, or a combination of the two. Available in Powder coat or raw dog. The top bar on our Win bars tend to be 22" across so if you would like alittle more length just let us know when you order.
  All our bars are built to order. What this means is that we don't mass produce anything. When your order comes in we begin production. The great thing about this is since we are building a set of bars for you specifically. Minor tweaks and adjustments can be made for no additional cost!


 




Finish
Sizes
1"- 7/8" Bar Size
Pull Back/ Pull Down



Comment

Deep Six Cycles Win Bars!

Deep Six Cycles

Our Win Bars!

Available in 1" or 7/8". With pull down, Pull back, or a combination of the two. Available in Powder coat or raw dog. The top bar on our Win bars tend to be 22" across so if you would like alittle more length just let us know when you order.
  All our bars are built to order. What this means is that we don't mass produce anything. When your order comes in we begin production. The great thing about this is since we are building a set of bars for you specifically. Minor tweaks and adjustments can be made for no additional cost!





Finish
Sizes
1"- 7/8" Bar Size
Pull Back/ Pull Down



Comment

Deep Six Cycles Tri Win Bars!

Deep Six Cycles

Here are some of the other bars we offer.

  Tri Win Bars. Available in 1" or 7/8". With pull down, Pull back, or a combination of the two. Available in Powder coat or raw dog. The top bar on our Win bars tend to be 22" across so if you would like alittle more length just let us know when you order.
  All our bars are built to order. What this means is that we don't mass produce anything. When your order comes in we begin production. The great thing about this is since we are building a set of bars for you specifically. Minor tweaks and adjustments can be made for no additional cost!









Finish
Sizes
1"- 7/8" Bar Size
Pull Back/ Pull Down











Comment

Cafe bump stop seat for Briton Bees.

Deep Six Cycles

  A little while back I was asked to make a Cafe style Bump Stop seat for an up coming project from Briton Bees. I never did snap a picture of it when I finished up the tin since it was late and my camera pretty much only works in the day light... I hand worked 16ga into what you see here. The bump stop was a lot of fun and I learnt a lot along the way. Its nice to have an excuse to beat on tin. I tend to find my self avoiding it. p.s. the upholstery was out sourced to some one that does it every day.

You can find Briton Bees her.-  http://britonbees.com/
It was a really great working with these guys! I'm looking forward to the next time! Great cats for sure!
Comment

Stolen Triumph Alert!

Deep Six Cycles

 This bike was stolen from a B.P. Station on Patten Ave. Here in Asheville. There is a reward for any information leading to the return of this 1972 Triumph Daytona. Any one seeing this motorcycle please contact the owner at 377.854. No Questions Asked he just wants his bike back! The vin is x641576t100r

 I got an email this afternoon, so here's an update on the situation!-
 "I'm happy to report that I recovered my bike no worse for wear than it is missing its plate!  Best possible scenario; some n'er-do-well got tired of pushing it up hill and stashed it behind an apt. building, covered with a tarp.  I'm now the proud owner of a new tarp!"
1 Comment

Sweepin!

Deep Six Cycles


 These are a custom variation of our Win Bars. We made these by request for a 33er. Narrow as hell  and just the ticket!
Comment